Horror Wound Transfer - Bullet Hole
Availability: Out of stock
There isn’t much that is more terrifying than a monster/bad guy that can survive a headshot… From Zombie, werewolves and even vampires (to an extent) can be put down with an old fashioned bullet, but what if that didn’t stop them. Raise your costume idea to immortality with this transfer and finally let the bad guy win.
These wound transfers are an excellent alternative to the latex applications, they are allergy safe, latex free and only use water to be applied. Take the hassle out on your prosthetics this Halloween and go with a wound transfer instead as they are safe and non-toxic and there is no glue required.
- Open your "Horror Wound Transfer" By cutting above the blister and remove from packaging. Peel the clear plastic sheet away from the adhesive sheet.
- Place the transfer face down on the adhesive sheet, pushing trapped air outwards from the centre.
- Carefully cut out each piece making sure you do not cut into the transfer. Once complete, for a better placement, hold the transfer towards the light and draw the shape on the back of the adhesive sheet.
- To apply, peel off the clear plastic sheet from the transfer and place the transfer on the skin, pressing firmly. Using a sponge, apply water to the adhesive paper.
- Make sure you give the transfer one last press and slowly peel the adhesive paper away. Press down any loose edges with a wet finger. To complete the look you can add blood or make-up as desired.